Configure SPB-PIM Gateway VLAN Optional Parameters
About this task
Configure the SPB-PIM Gateway interface parameters on a VLAN.
Procedure
- In the navigation pane, expand .
- Select VLANs.
- Select the Basic tab.
- Select a row for the VLAN, and then select IP.
- Select the SPB-PIM-GW tab.
- In HelloInterval, type the hello transmission interval.
- In JoinPruneInterval, type the join prune transmission interval.
- Select Apply.
SPB-PIM-GW Field Descriptions
Use the data in the following table to use the SPB-PIM-GW tab.
Name |
Description |
---|---|
OperState |
Displays the current operational state of this SPB-PIM Gateway interface. |
Address |
Displays the primary IP address of this router on this SPB-PIM Gateway interface. |
AddressMask |
Displays the primary IP address mask of this router on this SPB-PIM Gateway interface. |
HelloInterval |
Configures the PIM HELLO transmission interval. This SPB-PIM Gateway VLAN level interval setting overrides the inherited global SPB-PIM Gateway HELLO interval setting. Setting the HELLO Interval to 0 causes the neighbors to never expire its neighborship with this local SPB-PIM Gateway interface. |
JoinPruneInterval |
Configures the PIM JOIN PRUNE transmission interval. This SPB-PIM Gateway VLAN level interval setting overrides the inherited global level JOIN PRUNE transmission interval setting. |